Chimney Repair in Pasadena - Inspected on Camera, Then Priced in Writing

Trusted Chimney Repair for Pasadena Homeowners

Chimney repair in Pasadena usually starts with one visible clue: a stain on the ceiling, a crown with chunks missing, or a rusted cap that let rain straight into the flue. Left alone, those small failures widen, and what could have been a resurfaced flue turns into a full reline. Our technicians have up to 14 years of experience reading exactly that kind of damage, and we specify professional-grade materials from makers like HeatShield and DuraFlex rather than whatever the supply house had in stock.

Call (833) 334-7488

We handle sweep, repair, and inspection under one company, so you’re not coordinating three contractors for one chimney. Bring us a problem in Pasadena and we’ll tell you what your chimney needs, and what it doesn’t. Call (833) 334-7488. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Chimney Cap Installation

Chimney Cap Installation is the fitting of a protective cover over the flue opening, and it’s the cheapest insurance a chimney has. A cap keeps rain, birds, squirrels, and leaves out of the flue while still letting smoke and gases escape. In Pasadena, where heavy summer downpours arrive fast, a flue with no cap takes on water that soaks into creosote and rusts the damper assembly. We fit caps from Gelco and Famco and match the size to your actual flue opening rather than forcing a universal lid over a non-standard crown. Typical installation runs $250-$650 depending on the cap style, the flue count, and whether a custom screen is needed. The written estimate sets the final price.

Caps for Single and Multi-Flue Chimneys

A single-flue chimney is straightforward: one cap, one opening, sized to the flue tile. Multi-flue chimneys need a larger outside-mount cap that covers the whole crown, and those are where we see the most failures from caps that were never sized right.

Animal Guards and Spark Screens

Stainless mesh screens keep birds and squirrels from nesting in the flue, and the mesh size matters because too coarse and animals get through. A proper spark screen also keeps embers from landing on the roof surface. We fit both as part of the cap rather than as an afterthought.

Chimney Cap Replacement

Chimney Cap Replacement is the removal of a damaged cap and the fitting of a new one, and it’s due when the old cap has rusted through, warped, blown loose in a storm, or lost its mesh. A failed cap does more damage than no cap at all, because it often sits crooked and channels water toward the flue instead of away from it. We pull the old cap, inspect the crown and flue tile underneath while everything is exposed, then fit a new unit from Gelco or Famco. Typical replacement runs $275-$700 depending on size and access. If the old cap was attached with rusted bolts that snapped, we repair the mounting points rather than covering the problem. The written estimate sets the final price.

Rust and Wind Damage

Galvanized caps in this part of Texas rust from the inside out where moisture sits in the mesh. Once the frame is pitted, patching it is wasted money. Wind damage shows up as a cap sitting at an angle or missing bolts, which is a quick fix when caught before the next storm.

Upgrading to a Stainless Cap

Stainless holds up far better than galvanized against constant humidity and rain. The cost difference is small next to replacing a cheap cap twice. It’s the upgrade we suggest most often on Pasadena homes.

Chimney Liner Installation

Chimney Liner Installation is the fitting of a new flue liner inside the existing chimney, and it’s needed when the clay tiles are cracked, spalling, or missing, or when a new appliance requires a correctly sized flue. A cracked liner lets heat and carbon monoxide reach framing and living space, which is why a damaged liner isn’t a repair you can defer. We install DuraFlex flexible stainless liner systems, which handle the offsets and irregular flues that rigid liner can’t follow. Where the tiles are still sound but the surface has broken down, HeatShield resurfacing can restore the flue without a full reline. Typical liner installation runs $1,800-$4,500 depending on flue height, liner diameter, and whether the chimney needs prep work first. The written estimate sets the final price.

Flexible Liners for Irregular Flues

Older Pasadena chimneys often have an offset or a slight bend that rigid liner will not pass. DuraFlex flexes through those runs and then holds its shape. That’s the difference between relining the chimney and being told it can’t be done.

Resurfacing Before You Reline

HeatShield is a repair-grade product that rebuilds the flue surface where the tile has cracked or flaked but the structure is intact. It costs less than relining and buys real years of service. We recommend it when the camera shows it will hold, and we say so plainly when it won’t.

Chimney Flashing Repair

Chimney Flashing Repair addresses the metal that seals the joint where the chimney meets the roof, and it’s the fix you need when water is coming in at the chimney rather than down the flue. Flashing fails at the seams, at the step flashing along the roof slope, and where old tar or mastic was smeared on instead of properly formed metal. We replace the flashing with correctly bent material and seal it against the masonry and shingles. Typical flashing repair runs $350-$900 depending on the roof pitch, the chimney size, and how much of the old flashing has to come off. Roof leaks near a chimney are almost never the roof alone, so we check both before quoting. The written estimate sets the final price.

Reading a Leak at the Chimney

Water that shows up on the ceiling a few feet from the chimney is usually flashing. Water inside the firebox is usually the crown or cap. We confirm which one with a camera and a hose test rather than guessing from the stain.

Why Tar Patches Fail

Mastic and tar crack as the roof expands and contracts through the seasons. A proper flashing repair uses formed metal and counter-flashing set into the masonry. It lasts, and the tar patch doesn’t.

Chimney Crown Repair

Chimney Crown Repair fixes the concrete cap on top of the chimney, the sloped surface that sheds water away from the flue. When the crown cracks, water runs down through the masonry and shows up as efflorescence, rusted damper parts, or a stain on the ceiling far below. We rebuild failed crowns with proper slope and overhang so water actually leaves the chimney instead of pooling on top. Hairline cracks get sealed; a crown that has separated from the flue gets rebuilt. Typical crown repair runs $400-$1,200 depending on size and whether it’s a repair or a full rebuild. A crown that fails entirely can allow water into the structure, so it’s cheaper to address while the crack is small. The written estimate sets the final price.

Cracks, Spalling, and Separation

Fine cracks are normal movement and we seal them. Spalling, where the surface flakes off in chunks, means the concrete is breaking down. Separation from the flue tile is the serious one, since water gets straight into the chimney wall.

Rebuilding With Correct Slope

Many crowns were poured nearly flat, so water sits on them instead of running off. A rebuild gives the crown a proper pitch and a drip edge over the masonry below. That detail is most of the reason a new crown lasts.

Chimney Repair Companies

Chimney Repair Companies in this area range from a sweep with a brush and a ladder to a full-service outfit that handles masonry, liners, and inspection. What separates them is whether they diagnose before they quote, and whether they can finish the job without handing part of it to someone else. We’re the second kind: sweep, repair, and inspection handled by a single company, with one point of contact from diagnosis through completed repair. We also work with professional-tier brands like Olympia Chimney and Copperfield so repairs are done with parts professionals specify, not generic substitutes. Most repair calls run $250-$1,200, with liner work higher. The written estimate sets the final price, and estimates are free.

Questions Worth Asking Before You Hire

Ask whether the company inspects with a camera before recommending liner or masonry work, and whether they can show you the footage. Ask who actually performs the masonry if it’s needed. A company that subcontracts the hard part is a company that can’t stand behind it.

Reading a Quote That Doesn’t Add Up

A quote for thousands of dollars of liner work with no camera evidence is a quote you can’t verify. We show the footage and explain what we see. If the work can safely wait a season, we say that too.

Chimney Masonry Repair

Chimney Masonry Repair covers the brick, mortar joints, and structural work on the chimney itself, and it’s due when joints are crumbling, bricks are spalling, or the chimney is leaning. Repointing, the process of grinding out failed mortar and packing in new, restores the joints without replacing sound brick. Cracked or spalled brick gets replaced, and any chimney with a lean gets checked for a structural cause before cosmetic work begins. We handle masonry alongside the flue and exterior work so nothing gets left for a second contractor to rediscover. Typical masonry repair runs $600-$2,500 depending on the amount of repointing, the brick count, and access. Minor joint repair is far cheaper than rebuilding, so it’s worth an inspection early. The written estimate sets the final price.

Repointing vs. Rebuilding

If most of the brick is sound and the mortar is the failing part, repointing restores the chimney at a fraction of a rebuild. Rebuilding is for brick that has lost its face or a chimney with structural movement. We tell you which one you’re looking at.

Water Is Behind Most Masonry Damage

Crumbling mortar and spalling brick almost always trace back to water entering at the crown or flashing. Fixing the masonry without fixing the water source means doing it again. We check both before quoting.

Brands We Service

We work with DuraFlex liner systems and know where flexible stainless gives out first: at the top plate where the liner meets the cap, and at the appliance connector. That’s the point we inspect closely on any reline follow-up. We also install and service HeatShield resurfacing, and we know which flue conditions it will hold and which ones call for a full liner instead.

Our cap and exterior work uses Gelco and Famco components, and we fit Olympia Chimney and Copperfield parts where the job calls for them. Whether you have DuraFlex, HeatShield, Olympia Chimney, or any other make, we can help.

Signs You Need a Pro Right Now

• Water staining on the ceiling or chimney breast. A stain near the chimney usually means flashing, crown, or cap failure, and it will spread into the framing if ignored. It’s a repair, not a cleaning.
• Crumbling mortar or loose bricks. Mortar that brushes away between the bricks means the joints have failed and water is getting in. Bricks that move are a structural warning worth a look before the next heavy rain.
• A damaged or missing cap. An open flue lets rain, animals, and debris straight in. It also lets sparks near the roof surface, which is why we treat a missing cap as a prompt repair.
• Cracked or flaking flue tile. Visible cracks in the liner let heat and carbon monoxide reach the structure. This is a stop-using-the-fireplace sign until it’s inspected.
• Rust on the damper or firebox. Rust inside the firebox means water is entering from above, not condensation. The source is almost always the crown, cap, or flashing.

Our Process, Step by Step

1. 1
   Phone consultation. We ask what you’re seeing and where, then book a visit. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
2. 2
   Full inspection with camera. We run a camera down the flue and check the crown, cap, flashing, and masonry from the roof. You see the footage, not just the summary.
3. 3
   Written estimate with evidence. Every recommendation is tied to something visible in the inspection. Nothing is added to the list that the camera doesn’t support.
4. 4
   Repair with specified materials. We use DuraFlex, HeatShield, Gelco, Famco, and Olympia Chimney components matched to the job. One company handles the whole repair, start to finish.
5. 5
   Final check and photo report. We confirm the repair does what it was meant to do and leave you with photos of the finished work. If something can safely wait, we tell you that before we leave.

How Much Does Chimney Repair Cost in Pasadena?

Our Service Area Near Pasadena

We cover Pasadena and the surrounding communities, including Deer Park, South Houston, La Porte, and the villages along the bay: Taylor Lake Village, El Lago, Beach City, Piney Point Village, Spring Valley Village, and Bunker Hill Village. If you’re outside that ring, call and we’ll confirm coverage. We also handle chimney repair and chimney inspection across the same area, so one call covers both if you’re not sure which one you need.

Frequently Asked Questions About Chimney Repair in Pasadena

Schedule Your Chimney Repair Service in Pasadena Today

A small chimney problem in Pasadena stays small only if it’s caught. We inspect with a camera, show you the evidence, and quote only the work your chimney actually needs, with professional-grade materials and one point of contact from start to finish. Call (833) 334-7488 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Remington Chimney Sweep.