Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Pasadena?
Chimney repair in Pasadena typically costs $180 to $340 for a minor fix like a damaged cap or flashing, $450 to $1,200 for crown repair or chimney resurfacing, and $1,800 to $4,500 for a full flue reline. Larger structural work on a masonry chimney can run $2,500 to $6,500, and every price is set by a written estimate before any work starts.
Those numbers cover the Pasadena market in 2026 and reflect what the job actually involves: the diagnosis, the materials, and the labor. A short inspection tells us which of those ranges your chimney falls into. It’s the difference between patching a worn crown and relining a flue that’s failed, and the two costs are several thousand dollars apart. Remington Chimney Sweep handles chimney repair across Pasadena, and we’ll tell you what your chimney needs, and what it doesn’t.
Here’s what we cover: a typical cost breakdown, the local factors that push a Pasadena chimney job up or down, and how to keep the bill reasonable without skipping work that protects your home.
Key Takeaways
- Most Pasadena chimney repairs land between $180 and $1,200. Relining is the biggest line item at $1,800 to $4,500.
- Pasadena’s humid Gulf climate is hard on masonry crowns and flashing, so exterior repairs come up often here.
- HeatShield resurfacing can restore damaged flue tile for less than a full reline in the right conditions.
- Our technicians have up to 14 years of experience, and estimates are free.
Chimney Repair Cost Breakdown (2026)
The table below shows typical ranges for the repair work we see on Pasadena homes. These are estimates, not quotes. Your written estimate sets the final price.
| Repair type | Typical range (Pasadena, 2026) | What it covers |
| Chimney cap replacement | $180 – $450 | New cap or cover to keep rain and animals out of the flue |
| Flashing repair | $300 – $700 | Resealing or replacing the metal where the chimney meets the roof |
| Crown repair | $450 – $1,200 | Patching or rebuilding the concrete crown that sheds water off the chimney top |
| Chimney resurfacing (HeatShield) | $900 – $2,200 | Restoring damaged flue tile without a full reline |
| Tuckpointing (mortar repair) | $600 – $2,000 | Repointing joints in the brickwork; price depends on how much wall is affected |
| Flue relining | $1,800 – $4,500 | New stainless liner, typically DuraFlex, fitted to the flue |
| Structural masonry repair | $2,500 – $6,500 | Rebuilding a section of chimney that has moved or deteriorated |
What drives the cost up or down is mostly the condition of the chimney and how much of it is affected. A cap and some flashing work is a half-day job. Once water has worked into the brickwork, or the flue tile has cracked through, the scope widens. We specify professional-grade materials on every job, which means the liner or the crown going back on your chimney is the same product chimney professionals nationwide specify, not whatever the supply house had in stock. That matters for how long the repair holds up, and it’s a big part of why two estimates for “the same” reline can differ by a thousand dollars.
What Affects Chimney Repair Pricing in Pasadena
Pasadena sits low and humid, close to the ship channel, and the climate shapes what fails on a chimney here. The factors below are the ones that move a price the most.
- Gulf humidity and masonry. Pasadena’s damp air keeps brickwork wet for stretches at a time. Wet brick holds moisture, mortar softens, and small cracks turn into tuckpointing jobs. Chimneys on the shadier side of a Pasadena home tend to see this first, so where your chimney sits relative to the tree cover matters to the estimate.
- Storm-driven rain against the crown. The flat concrete crown on top of a masonry chimney takes direct rain in the summer storms that roll through the Houston area. A crown that has cracked costs $450 to $1,200 to address. Left alone, water gets down behind the flue tile and the price climbs toward relining territory.
- Age of the flue tile. Older Pasadena homes with original clay flue tile often have hairline cracks that aren’t visible from the firebox. Whether that tile can be resurfaced with HeatShield or needs a full DuraFlex liner is the biggest single swing in repair cost, often more than $2,000.
- Roof pitch and chimney height. A tall chimney on a steep roof takes more time to reach and set up on, and that labor shows up in the estimate. Straightforward access keeps the price at the lower end of a range.
- Masonry vs. prefab construction. A masonry chimney and a factory-built one fail in different places and need different parts. Gelco and Famco caps and covers fit the exterior system; an older prefab unit may need specific components. Knowing which type you have before the visit speeds up the estimate.
- How much of the chimney is affected. Repointing three courses of mortar is a different job from rebuilding a chimney shoulder. The more of the structure involved, the more materials and time.
Climate aside, there’s one factor a lot of homeowners don’t expect: what a previous repair left behind. Improperly seated chimney caps, flashing sealed with caulk instead of properly formed metal, or a liner that was never sized right can all add to what a correct repair costs, because the first step is undoing the last one. Our technicians have up to 14 years of experience, and part of that experience is recognizing when that’s happened.
Why Chimney Repairs Cost What They Do
A chimney repair quote isn’t just labor plus parts. There’s real diagnosis in it. A repair that lasts depends on finding out why the chimney failed in the first place. Water is the culprit in most Pasadena chimney damage, and finding where the water is getting in can take as much care as the repair itself.
Then there’s the material. We work with a curated roster of professional-tier brands on every job: DuraFlex for flexible stainless liners, HeatShield for flue resurfacing, Olympia Chimney for liner components, and Gelco and Famco for caps, crowns, and covers. We specify these because they’re what professionals actually install, and the price reflects the part, not the markup game. A generic liner that costs less up front isn’t a saving if it has to come out in a few years.
Finally, there’s the scope. Chimney work touches more than the flue. It touches the roof, the flashing, the crown, the cap, and the brickwork, and those pieces have to work together. We cover the full chimney system, sweep, repair, and inspection, so a repair from one part of the job doesn’t leave a gap in another. One company, every part of the chimney.
What You Need Before You Get a Repair Estimate
A repair estimate goes faster, and tends to come in tighter, when the chimney has been looked at first. That’s why the usual sequence is an inspection, then the repair. The inspection tells us the condition of the flue, the crown, the cap, and the flashing, and it lets us put a real scope and a real number in front of you instead of a range. The written estimate then fixes the price. You’ll know the full cost before anyone starts work.
If you haven’t had the chimney looked at, start there. The estimate is free, and the diagnosis is what keeps you from paying for a reline when a resurfacing job would do, or from patching a crack that’s a symptom of a bigger problem. Call (833) 334-7488 to set one up. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday.
How to Save on Chimney Repair
The most reliable way to keep a chimney repair bill down in Pasadena is to catch the problem at the top of the chimney before it reaches the flue. Water is the mechanism, and every step that keeps water out saves money later.
- Fix the crown before it fails. A crown repair at $450 to $1,200 is a fraction of a reline at $1,800 to $4,500. When the crown cracks, water starts working into the flue tile within a season or two of Houston-area rain.
- Keep a cap on the flue. A proper cap and cover, by Gelco or Famco, keeps rain and animals out of the flue for a modest cost up front. It’s the cheapest protection on the whole chimney.
- Ask about HeatShield resurfacing. When the flue tile has surface damage rather than a structural failure, HeatShield can restore it without full relining. That’s a repair-grade product we use specifically because it gives homeowners a durable alternative at lower cost, and it’s worth asking whether your chimney is a candidate.
- Deal with flashing properly. Caulk over failing flashing is a temporary fix that comes back. Properly replaced flashing at $300 to $700 prevents the roof and ceiling damage that costs far more.
- Get the diagnosis right the first time. An estimate that’s too low because the scope was missed isn’t a saving. We’ll tell you what your chimney needs, and what it doesn’t, and put it in writing.
One more: don’t wait for a problem you can see from the ground to become one you can’t. If the chimney cap is loose, the crown is cracked, or there’s staining on the brickwork, a free estimate costs you nothing and can save you a much larger repair. Call (833) 334-7488. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace? How to Decide
For most Pasadena chimneys, repair is the answer. A chimney is a durable structure, and a cracked crown, worn flashing, or a failed cap is a maintenance problem, not a reason to tear the chimney down. The question of full relining comes up when the flue tile has failed, and even then, resurfacing with HeatShield is worth pricing before a full liner. Full reconstruction is rare, and usually only comes up when the masonry itself has moved. We’ll tell you which of those you’re looking at. Call for a free estimate and we’ll put the options, and the numbers, in front of you.
What Happens When You Call
You call, and we book an estimate. We look at the chimney, the flue, the crown, the cap, and the flashing, and we explain what we found. Then you get a written estimate with the price for the work. The price is set per job by that estimate, and it doesn’t change unless the scope does. We don’t hand off parts of the job that need real expertise. Diagnosis, materials, and completed repair come from one point of contact. That’s what “your chimney, start to finish” means in practice.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Pasadena?
Chimney repair in Pasadena typically runs $180 to $340 for a minor fix, $450 to $1,200 for crown or exterior work, and $1,800 to $4,500 for a full flue reline. Your written estimate sets the final price. Call (833) 334-7488 for a free estimate and an exact quote for your chimney.
Is it cheaper to repair or replace a chimney?
Repair is almost always cheaper than replacing a chimney, and for most Pasadena homes it’s the right call. A crown repair at $450 to $1,200 or a reline at $1,800 to $4,500 is far less than a rebuild at $2,500 to $6,500, and rebuilds only come up when the masonry has moved. Call (833) 334-7488 and we’ll tell you which one you need.
How much does a chimney reline cost in Pasadena?
A flue reline in Pasadena typically costs $1,800 to $4,500, depending on the flue’s height, condition, and whether it’s a standard or irregular shape. A flexible DuraFlex liner fits flues other companies decline to touch. If the tile only needs resurfacing, HeatShield can bring the cost down. Call (833) 334-7488 for an exact figure.
Can you fix my chimney the same day?
Many smaller repairs can be done the same day. Minor fixes like a cap or flashing work fall in the $180 to $700 range and are often finished in a single visit, while crown work and relining are usually scheduled jobs. The estimate tells you which. Call (833) 334-7488. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do you charge for a chimney repair estimate?
No. Our estimates are free. The price is set per job by the written estimate, and you’ll have it before any work begins. There’s no service-call charge to look at the chimney and tell you what it needs. Call (833) 334-7488 to book yours. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why is my chimney repair quote higher than another company’s?
Often it’s the material and the scope. A liner from DuraFlex or a resurfacing job with HeatShield costs more to supply than a generic substitute, and a quote that misses part of the job looks cheaper until that part is added. Ask what brand and scope each quote includes. We specify professional-grade materials on every job and tell you exactly what’s covered.
Get a Free Chimney Repair Estimate in Pasadena
If you’ve got a cracked crown, failing flashing, or a flue that needs attention, the fastest way to know the cost is a free estimate. We’ll look at the whole chimney, tell you what it needs and what it doesn’t, and put the price in writing. Remington Chimney Sweep handles the sweep, repair, and inspection in one place, using the same materials chimney professionals specify. Call (833) 334-7488. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Pasadena market as of 2026. Remington Chimney Sweep offers free estimates – call (833) 334-7488.
Written by the team at Remington Chimney Sweep.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Karen Chen"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Elena Hernandez"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Matt Sutton