Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Pasadena?
Chimney cap and crown work in Pasadena typically runs $180 to $340 for a standard cap and $575 to $1,950 for crown repair or replacement, depending on the size of the flue, the material, and how much of the existing crown has failed. A simple cap installation is usually the least expensive part of the job. A crown that has cracked through and needs to be rebuilt costs more because the masonry has to come off, the substrate has to be prepped, and the new crown has to be formed and cured correctly. We give a written estimate before any work starts, and the estimate sets the final price.
Call (833) 334-7488 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A single-flue cap with a screen commonly lands between $180 and $340 in the Pasadena market.
- Crown repair or replacement is the bigger ticket: roughly $575 to $1,950, with rebuilds at the top of that range.
- Caps do the cheap work of keeping out rain, birds and debris. Crowns do the structural work of shedding water off the top of the chimney.
- Both sit on the exterior of the chimney, so we often quote them together with flashing and cover work.
- Our technicians have up to 14 years of experience, and we work with professional-grade brands like Gelco and Famco for caps and covers.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the pricing shakes out across the exterior parts of the chimney. These are typical ranges for the Pasadena market in 2026. Your written estimate is what sets the final number, since every chimney is a little different.
| Line Item | Typical Cost Range | What It Covers |
|---|---|---|
| Standard single-flue cap | $180 – $340 | A stock cap with a spark screen on one flue |
| Custom or multi-flue cap | $340 – $750 | Fabricated caps for odd flue sizes or chimneys with several flues |
| Crown repair (cracks, minor spalling) | $575 – $950 | Grinding out cracks, patching, resealing the crown surface |
| Full crown rebuild / replacement | $950 – $1,950 | Removing the old crown, forming and finishing a new one |
| Crown coating / resurfacing | $650 – $1,200 | Repair-grade resurfacing on a crown that’s pitted but sound underneath |
| Chimney cover / top-mount damper combo | $420 – $850 | Full cover or cap with an integrated damper |
| Flashing reseal (bundled with crown work) | $250 – $450 | Resealing or replacing where the chimney meets the roofline |
| Multi-flue chimney, cap plus crown | $1,100 – $2,400 | Coordinated cap and crown work on a larger chimney |
What pushes a job toward the top of these ranges? Multiple flues, an irregular crown shape, a crown that’s so far gone the whole thing has to come off, or a chimney that’s been letting water in for a while and has spalled masonry to deal with. What keeps it lower? A single flue, a stock cap that fits, and a crown that just needs repair rather than a rebuild.
The other variable is what’s under the damage. A crown that looks like it only has surface cracks sometimes turns out to have a loose or washed-out bed underneath, and that changes the job from a patch into a rebuild. We won’t know for sure until we’re up there. That’s why the written estimate follows the inspection, not the phone call.
What Affects Chimney Cap & Crown Pricing in Pasadena
Pasadena’s climate and housing stock both play into the numbers. You’re in a wet, humid part of southeast Texas, and the sun and afternoon storms do real work on a chimney’s exterior. Here are the factors that move the price most:
- Number of flues. A single-flue chimney needs one cap. A chimney with two or three flues needs a fabricated cap or several individual ones, and the price scales with the count.
- Flue shape and size. Standard round or square flues take stock caps. Oval, oversized, or irregular flues require a custom cap, which adds labor and material.
- Condition of the crown. Hairline cracks are a repair. A crown that’s cracked through, separated from the flue, or washing out at the edges is a rebuild, and the price reflects the masonry work involved.
- Height and access. A chimney that’s high off the roofline or hard to reach from a ladder takes more setup time. Steep roofs and tight side yards slow the work down.
- Material choice. Cast crowns, CrownCoat-style resurfacing products, stainless caps, and copper caps all sit at different price points. We work with Gelco and Famco for caps and covers, and HeatShield for resurfacing, so you’re getting the same materials chimney professionals specify.
- Related issues found during inspection. Spalling masonry, failed flashing, or a missing rain cap on the flue are common add-ons. Fixing them at the same time as the cap and crown usually costs less than coming back later.
We also see a pattern with older Pasadena homes: original crowns poured decades ago that have started to hollow out underneath. The top looks intact, but it’s holding water against the flue. That’s the case where resurfacing can rescue a crown that would otherwise need to be rebuilt. HeatShield resurfacing is a repair-grade product that restores damaged flue tile and crown surfaces without full relining, and it’s a cost-effective alternative when the structure is sound and the surface is the problem.
Does the Cap Really Need to Be Replaced?
Not always. A cap that’s still solid, sitting flat, and properly screened just needs cleaning and maybe a reseal of the caulk line. A cap that’s rusted through, missing screws, dented, or sitting crooked has stopped doing its job and should be replaced. The cost of replacement is usually less than the cost of dealing with a bird nest, a rain-soaked flue, or a spark that finds its way to the roof deck.
Caps are the inexpensive end of chimney work, and they’re the first line of defense. If yours is missing or damaged, replacing it is the sensible first call. Call (833) 334-7488 for a free estimate.
How to Save on Chimney Cap & Crown
There’s no trick to pricing this work, but there are sensible ways to keep the number down.
- Bundle the cap and crown in one visit. The setup, ladder work, and inspection are shared, so quoting both together usually costs less than two separate trips.
- Repair before it becomes a rebuild. A crown with surface cracks repaired early stays a repair. Left alone, the water gets in and the job grows.
- Ask about resurfacing instead of replacement. If the crown is pitted but structurally sound, HeatShield resurfacing can extend its life, and it’s priced below a rebuild.
- Get the flashing checked at the same time. Flashing that’s failed lets water in at the roofline, which does more damage than a crown ever will. Checking it during the crown job is cheap insurance.
- Get a written estimate before work starts. Our estimates are free, and the written number is what you pay.
We’ll tell you what your chimney needs, and what it doesn’t. If the crown has another five years in it, we’ll say so rather than sell you a rebuild.
Is a Chimney Cap or Crown Repair Worth It in Pasadena?
Yes. A cap costs less than most home repairs, and it does specific, useful work: keeping rain, birds, squirrels and debris out of the flue. In Pasadena’s humid climate, an open flue takes in water vapor on the daily, and that moisture works on the masonry liner over time. A crown does similar work at the top of the chimney, shedding rain away from the flue tiles instead of letting it soak in at the seams.
The cost of ignoring both is what most homeowners underestimate. Water that gets into a crown or down an open flue leads to spalling brick, cracked tiles and, over time, a relining job that costs many times what a cap and crown would have cost. If you’re unsure what condition your exterior chimney is in, a chimney inspection can tell you exactly what you’re dealing with before any money is spent.
What Happens When You Call
We’ll ask about the chimney, the fireplace and what you’ve noticed. Then we schedule a visit, come out, look at the crown, cap and flashing, and give you a written estimate for the work. That’s it. One estimate, one company, and the full sweep-repair-inspection scope in one place, so you’re not coordinating three contractors for one chimney problem.
Call (833) 334-7488. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Pasadena?
A standard single-flue chimney cap with a screen typically costs $180 to $340 installed in Pasadena. Custom or multi-flue caps run $340 to $750. Call (833) 334-7488 for an exact quote, since estimates are free.
How much does crown repair cost in Pasadena?
Crown repair typically runs $575 to $950, and a full crown rebuild runs $950 to $1,950. The difference comes down to whether the crown can be patched or has to be replaced. A quick look from a technician settles which job you’re facing. Call (833) 334-7488 for a free estimate.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the crown is still structurally sound: usually $575 to $950 versus $950 to $1,950 for a rebuild. If the crown has cracked clean through or separated from the flue, replacement is the right call, and patching won’t hold. Call (833) 334-7488 and we’ll tell you which one your chimney needs.
Do I need a cap and a crown, or just one?
They do different jobs, so most chimneys need both. A cap covers the top of the flue and costs $180 to $340. A crown covers the top of the chimney itself and costs $575 to $1,950 to repair or rebuild. A chimney can need a cap without a crown, but rarely a crown without a cap. Call (833) 334-7488 for a free estimate.
Can the cap and crown be done in one visit?
Yes, in most cases. A standard cap and a crown repair or rebuild can usually be handled in a single appointment, which keeps the total cost down since the setup is shared. Call (833) 334-7488 to schedule.
What causes chimney crowns to fail in southeast Texas?
Sun, frequent rain and humidity. A crown takes years of afternoon storms and then bakes in the sun, and the surface eventually cracks. Once water gets into those cracks, the damage moves faster. A crown that’s cracked, spalling or pulling away from the flue should be looked at before the next rainy season catches it.
Where We Work in Pasadena
We work throughout the Pasadena area, including homes around the older neighborhoods near the ship channel, the residential streets off Spencer Highway, and the newer subdivisions spread out toward Beltway 8. If you’re in the area and your chimney cap or crown is past its prime, Pasadena is our home market. Remington Chimney Sweep handles the full scope: sweeping, repair and inspection, with materials from the brands chimney professionals specify, including DuraFlex liner systems, Olympia Chimney and Copperfield. And since some crown problems turn out to involve the flue beyond a simple surface issue, we can go straight from the estimate into HeatShield resurfacing or a DuraFlex liner installation without handing you off to another company.
If you want a specific number for your chimney, don’t guess from a table. Our technicians have up to 14 years of experience and can tell you exactly what your cap and crown need, and what they don’t. Call (833) 334-7488. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the pricing is straightforward, and the written estimate is the final price.
Pricing reflects the Pasadena market as of 2026. Remington Chimney Sweep offers free estimates – call (833) 334-7488.
Written by the team at Remington Chimney Sweep.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Karen Chen"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Elena Hernandez"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Matt Sutton