Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Pasadena?
A standard chimney sweeping in Pasadena typically costs $150 to $300 for a single flue, and most homes here fall in the $175 to $250 range. A Level 2 inspection, which many homeowners pair with the sweep, usually adds $125 to $275. If the sweep turns up a damaged flue or a failing crown, repair work is quoted separately from $250 into the low thousands depending on what’s actually wrong.
Those are typical estimates for the Pasadena market as of 2026, not a fixed menu. The written estimate after we look at your chimney sets the final price. We’ll tell you what your chimney needs and what it doesn’t – the difference between a straight sweep and a repair is usually something a homeowner can see once we show them.
Key Takeaways
- Standard sweep in Pasadena: about $150 to $300 per flue.
- Level 2 inspection added to a sweep: roughly $125 to $275 more.
- A flue cap replacement typically runs $150 to $400; a crown rebuild $400 to $900.
- HeatShield resurfacing can restore damaged flue tile for less than a full reline.
- Our technicians have up to 14 years of experience, and the estimate is free.
Chimney Cleaning & Sweep Cost Breakdown (2026)
The table below lays out what individual pieces of chimney work typically cost in Pasadena. Treat these as ranges, not quotes – a chimney with one flue and light soot sits at the low end, and one with heavy creosote, an offset flue or a wood-burning insert pushes toward the top.
| Service | Typical Pasadena range |
|---|---|
| Standard chimney sweep (one flue) | $150 – $300 |
| Sweep with heavy creosote removal | $250 – $450 |
| Level 1 inspection (visual, with sweep) | $75 – $150 |
| Level 2 inspection (video camera, roof access) | $125 – $275 |
| Wood-burning insert or stove flue sweep | $200 – $400 |
| Multi-flue cleaning (per additional flue) | $75 – $150 |
| HeatShield flue resurfacing | $900 – $2,000 |
| DuraFlex stainless liner installation | $1,800 – $4,000 |
| Chimney cap, Gelco or Famco | $150 – $400 |
| Crown rebuild or CrownCoat repair | $400 – $900 |
| Flashing repair | $300 – $700 |
What pushes a job toward the high end here is rarely the sweeping itself. It’s what the brush finds. A house burner that’s been used for years without a sweep can hold several inches of glazed creosote on the flue walls, and that takes longer, uses different tools and sometimes needs a chemical treatment before the brush can do its work. An insert changes the geometry – the flue is smaller, the access is tighter, and the job takes longer than a straight masonry fireplace. And a chimney on a two-story section of roof means more setup for a Level 2 inspection than a single-story one.
On the repair side, the big variable is whether the flue tile is damaged or just coated with soot and glaze. If the tile is cracked in a few places but otherwise sound, HeatShield resurfacing can rebuild that interior surface and restore it – a repair-grade solution that costs meaningfully less than pulling the old flue apart and relining from top to bottom. If the tiles are split apart or misaligned, a full DuraFlex liner is the right call, and the price climbs accordingly. That’s the honest sorting we do on every job: not every chimney needs a liner, and not every chimney can get away with resurfacing.
What Affects Chimney Cleaning & Sweep Pricing in Pasadena
- How much the chimney has been burned. Light soot from a season of weekend fires sweeps out quickly. A fireplace that’s seen heavy use for several years without attention means more time on the roof and heavier creosote removal, which shows up directly in the estimate.
- Flue size and configuration. Pasadena has a mix of mid-century ranch homes and newer builds, and the older fireplaces often have offset flues or a smoke chamber that’s awkward to reach. Irregular flues that other companies decline to touch are exactly where DuraFlex liner systems earn their keep for us.
- Wood-burning insert vs. open fireplace. An insert runs a smaller flue with a tighter liner, so the sweep takes longer and costs a bit more. We tell homeowners this up front rather than surprising them at the door.
- Roof access and height. A chimney on a single-story ranch is straightforward. One on a steeply pitched two-story roof takes more setup for a Level 2 inspection, and that’s reflected in the range.
- What the inspection reveals. A sweep is a cleaning. An inspection is a look at the whole system – flue, smoke chamber, crown, cap, flashing. If resurfacing or a liner is needed, that’s a separate line on the estimate, and you’ll see it before any work begins.
- Exterior condition. Houston-area humidity works on masonry crowns and caps year-round, and a cracked crown or a missing cap lets water into the flue. Fixing those exterior pieces – the crown, cap and flashing – along with the sweep, or on its own, adds cost, but it’s the part of the chimney that protects everything inside it.
How to Save on Chimney Cleaning & Sweep
There’s no coupon culture in this trade worth chasing. The savings come from doing the right things in the right order.
- Get an inspection with the sweep. Pairing a Level 2 inspection with the cleaning keeps you from paying for a separate visit later and catches problems while the chimney is already open. It’s cheaper than two trips.
- Don’t let creosote build for years. Heavy glazed creosote removal costs more than a routine sweep because it takes more time and sometimes chemical treatment. Annual cleaning keeps you at the low end of the range.
- Ask whether resurfacing can replace a reline. If your flue tiles are cracked but not displaced, HeatShield resurfacing is often the repair-grade answer at a fraction of liner cost. We’ll tell you honestly which one your chimney actually needs.
- Fix the exterior before it becomes interior damage. A $150 to $400 cap replacement now beats water in the flue and a crown rebuild later. Gelco and Famco cap and cover solutions are what we specify for this.
- Bundle flues. If you have two fireplaces, cleaning both on the same visit costs less per flue than two separate sweeps.
And the estimate itself is free. Call (833) 334-7488 for a written estimate that lays out the sweep, the inspection and any repair separately – the written estimate sets the final price, so there are no additions later.
Why Pasadena Chimneys Need Attention in 2026
Pasadena sits close to the ship channel and the Gulf, and the humidity here works on masonry year-round. Crowns crack, mortar joints soften, and caps that were fine a few years ago start letting water in. None of that is dramatic, but it’s the slow damage that turns a $200 sweep into a $900 crown rebuild if it’s ignored. Winters stay mild, so many homeowners here burn less than they would up north, but the fireplace still gets used on cool evenings, and creosote still accumulates the same way.
That’s the local reason a sweep and inspection matter together. The cleaning removes what’s blocking the flue. The inspection catches what the weather and the years have done to the structure around it. Our technicians have up to 14 years of experience across both, and we specify professional-grade materials on every job – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield, the same manufacturers chimney professionals specify. When a repair is needed, you get parts that are meant for the job, not whatever the supply house had that week.
We work as one company on the whole chimney: sweep, repair and inspection, from diagnosis through the finished work. No coordinating three contractors for a single problem. Find out more about how we handle work across Pasadena.
Do You Need a Sweep or an Inspection First?
Start with the sweep, then inspect. In practice, we sweep the flue and inspect the whole system in one visit, because the inspection makes more sense once the flue is clean enough to actually see. If you’re buying a home, a Level 2 inspection is usually the right call before closing – and if you’ve just moved in, a sweep plus inspection tells you what you inherited. Call (833) 334-7488. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Cleaning & Sweep Cost
How much does chimney cleaning cost in Pasadena?
A standard chimney sweep in Pasadena typically costs $150 to $300 per flue, with most single-flue homes landing between $175 and $250. Heavy creosote or a wood-burning insert pushes the estimate toward $350 to $450. Call (833) 334-7488 for an exact quote – estimates are free.
Is it cheaper to repair or replace my chimney flue?
Repair is usually cheaper when the flue tiles are cracked but in place – HeatShield resurfacing typically runs $900 to $2,000, while a full DuraFlex liner installation runs $1,800 to $4,000. If the tiles are displaced or the flue is beyond resurfacing, relining is the right answer, and we’ll tell you which one your chimney needs. Call (833) 334-7488 for a free estimate.
How much does a chimney inspection cost in Pasadena?
A Level 1 visual inspection typically runs $75 to $150 and is often included with a sweep. A Level 2 inspection with video camera and roof access runs $125 to $275. If you’re pairing it with a cleaning, the combined visit is cheaper than two separate trips. Call (833) 334-7488 for an exact quote.
Can you clean my chimney the same day?
Same-day service is often possible depending on the schedule that day. Call (833) 334-7488. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday – a call outside dispatch hours is booked into the next opening. Estimates are free.
How much does it cost to replace a chimney cap or crown in Pasadena?
A chimney cap replacement typically runs $150 to $400, and a crown rebuild runs $400 to $900. Both protect the flue from water, and both are cheaper now than the interior repairs they prevent. We specify Gelco and Famco caps and covers. Call (833) 334-7488 for a free estimate.
Contact
If your fireplace has gone a season or two without a sweep, the estimate costs you nothing and tells you exactly where your chimney stands. Call (833) 334-7488 for a free estimate. We’ll tell you what your chimney needs – and what it doesn’t. One company, every part of the chimney: sweep, repair and inspection, with professional-grade materials on every job.
Pricing reflects the Pasadena market as of 2026. Remington Chimney Sweep offers free estimates – call (833) 334-7488.
Written by the team at Remington Chimney Sweep.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Karen Chen"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Elena Hernandez"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Matt Sutton